README file for Vaziri_2012_Kidney International

The MIAME information for this experiment is divided into the standard six sections: 
1. The raw data for each hybridization: 
The raw data from each sample is in Affymetrix CEL file format. Note there are CEL files for two separate versions of the PhyloChip microarray as noted in the files below, hence there are two file sizes.

2. The final processed data for the set of hybridizations in the study formatted as a data matrix used to draw the conclusions from the study. The values for each sample are trimmed mean (mean without the highest and lowest values) of the probe intensities for the perfectly-matched probes used to define each OTU. These values were scaled to an internal spike mix, and the rat data was also adjusted for total array intensity.  G2 (human) data are included on the first tab, while G3 data (rat) are on the second tab.
MIAME_PhyloChip_data.xlsx 

3. The essential sample annotation including experimental factors. 
MIAME_metadata.xlsx

4. The experimental design including sample data relationships (e.g., which raw data file relates to which sample, which hybridizations are technical, which are biological replicates). 
Same file as above. 

5. Reference commercial array catalog number.
G2: Affymetrix Custom Array (DOE16S - PhyloChip): PN 510706
G3: Second Genome PhyloChip(TM) Assay: PN49-0002A

6. Essential laboratory and data processing protocols. 
From isolated gDNA extracted from fecal samples, 500 ng of bacterial PCR product was prepared for PhyloChip hybridization. PCR products were fragmented according to the previously described method (G2 array prep. using DNAse, Brodie et al. AEM 2007) or using the Affymetrix kit designed for uracil-incorporated PCR product to a range of 50-200 bp. DNA labeling was as described in Brodie et al (AEM 2007) or commercial kits were utilized (for G3 chip prep., Affymetrix WT Double Stranded DNA Terminal Labeling), and Affymetrix GeneChip Hybridization, Wash, and Stain kits were used for PhyloChip processing. Briefly, the fragmented product was biotinylated using 8 µL 5x TdT buffer, 1.34 µL TdT enzyme, and 0.66 µL GeneChip Labeling Reagent in a final volume of 40 µL, incubated at 37°C for one hour, 70°C for 10 min., and then 4°C for 10 min.  Two microliters of 0.5 M EDTA was added to stop all enzymatic reactions.  The product was prepared for hybridization onto the array by adding 2.2 µL Control Oligo B2, 65 µL 2x Hybe Mix, 20.4 µL DMSO, and sufficient water to bring the final volume to 130 µL.  This mixture was incubated at 99°C for 5 min. to denature the DNA strands and then held at 48°C for 5 min. before being transferred to a pre-hybridized array also being held at 48°C.  Each reaction mixture was applied to the hybridization chamber of an array cartridge and incubated for 16 h in an Affymetrix hybridization oven at 48°C and 60 RPM. Hybridization solution was removed and the microarrays were stained according to the manufacturer's instructions. Fluorescent images were captured with the GeneChip Scanner 3000 7G (Affymetrix, 
Santa Clara, CA). An individual array feature was composed of a single probe 25mer on the surface. The central 9 pixels were ranked by 
intensity and the 75th percentile was used as the summary intensity for the feature. Probe 
intensities were background-subtracted and scaled to controlled Quantitative Standards 
(non-16S spike-ins) and outliers were identified as previously described (DeSantis et al. Microbial Ecology 2007).
 The hybridization score (HybScore) for an OTU was calculated as the mean intensity of the 
perfectly matching probes exclusive of the maximum and minimum.